BROWN SN 300 NEWTON MANUAL BAND SAW
The BROWN SN 300 NEWTON IBP PEDRAZZOLI manual saw features structural elements in cast iron and a remarkably robust structure which allows for the reduction of resonance and vibrations during the cutting process.
- 2 Speed Three-phase (V 400 – 50 Hz, other voltages upon request).
NEWTON DEVICE DESCRIPTION
M – Manual mode: Put the selector in M position (manual). Turn the specific handwheel so that it matches the index with 0 (zero) indicated on the scale. In this way we tighten the saw balancing contrast spring. Lock the piece by closing the vice. Press the start button and go on with the normal manual cutting cycle: remember that the bow descent is activated only by pressing the start button. It is possible to adjust bow descent pression acting on flow regulator.
D – Dynamic mode: Put the selector in D position (dynamic). Turn the specific handwheel so that it matches the index with 40 (forty) indicated on the scale. In this way the saw balancing contrast spring will be loosened. Adjust the limit switch at the end of the cut. Lock the piece by closing the vice, position the blade above the piece to be cut and press the start button. Now it is possible to adjust bow descent pression by means of the flow regulator: the bow will now go down by gravity autonomously. At the end of the cut the limit switch will stop the blade motion. Raise the bow above the piece and replace the bar to be cut.
BROWN SN 300 NEWTON
Invia link per il download a:
- Gear reducer.
- Newton device.
- Large circular table rotating together with the bow to ensure optimal support of the piece to be cut.
| Round tubes | 45° sx: 160 mm 0°: 220 mm 45° dx: 200 mm 60° dx: 130 mm |
| Square sections | 45° sx: 120 mm 0°: 190 mm 45° dx: 150 mm 60° dx: 110 mm |
| Rectangular sections | 45° sx: 160 x 130 mm 0°: 330 x 150 mm 45° dx: 160 x 130 mm 60° dx: 110 x 110 mm |
- Micromist lubrication.
- MRP pneumatic quick clamp kit.
- Laser cutting indicator.
- Mechanical speed variator.
- Loading & unloading conveyors.
| Dimensions (Length x Width x Height) | 1400 x 1500 x 1800 mm (Fermobarra) 870 x 1860 x 2100 (base) |
| Work plane height | 950 mm |
| Weight | 490 kg |
Ti potrebbero interessare:
Richiedi un preventivo gratuito
Sei interessato all’acquisto di questa macchina?
Grazie all’esperienza e alla competenza del nostro team, potrai ricevere un’offerta personalizzata e consigli utili per scegliere la soluzione migliore per le tue esigenze di piegatura tubi. Compila il form, un nostro consulente ti ricontatterà nel più breve tempo possibile.
